Corporate Information

Phone: 0086-371-67833161

Give due care to long unused machine maintenance

7/17/2012 1:38:49 AM

As with other ore dressing equipment, sand maker should be given more attention to maintenance when isn't in use for long time. Hereby, we introduce you an economic method, that is dilute hydrochloric acid. However, you should be care that rust things should not immersion too long, or the metal will take chemistry reaction. And other methods, such as ash propel and shot blast are also available. Then I will introduce you related information in details.

At first, chemistry method, as its name, makes use of chemistry reaction to remove rust. We common say it acid dipping, and it can only done in workshop. 

Another method is shot blast cleaning. Shot-blasting abrasives and polishing makes use of high-speed rotating impeller throwing grinding materials to the steel surface, so as to achieve the purpose of rust removal. It is a more advanced steel rust method for sand making machine cleaning processing. It is not only high efficiency, but also low cost, high degree of automation, and it is able to implement assembling operation, less environmental pollution, but it only available for indoor operation. 

Peening rust, an old kind of cleaning method, mainly use particles blast erosion effects posed to reach the appropriate roughness of the surface and cleaning. The relative equipment includes open shot (sand) derusting machine obturation shot peening (sand), vacuum shot blasting (sand). Open blasting (sand) is applied more widely, providing more thorough clean all impurities of metal surfaces, such as oxidation, rust and old paint, rust removal efficiency is as high as 4~5㎡/h, high mechanical degree, good effect. But the abrasive generally cannot be recycled, and it has an impact on other jobs, has trouble in cleaning up the work site. The environmental pollution is more serious, in recent years, it gradually been restrictions in use. 

Small pneumatic or electric device is another rust removal way. It mainly takes electricity or compressed air as power, assembling appropriate blasting device. And then it does oscillating movement or rotation to suit various rust removal occasions. The equipment are corner polished machine, wire brush, wind dynamic needle beam rust removal device, wind dynamic knock rust hammer, tooth type rotating rust removal device, they are belonging to half mechanized device, tools are light, and large mobility. So, this way can more thoroughly remove rust, and old coating. It can do roughness removal process to application layer. The efficiency is higher than manual rust removal, can be up to 1~2㎡/h, but cannot drop oxidation skin. 

All in all, the four methods we provide you for sand making plant maintenance and rust removal. In reality living, there are some ways are useful for our daily life. Hongxing Mining Machinery include many other equipment, the leading products are sand maker, vibrating screen, vibrating feeder and so on.