Corporate Information

Phone: 0086-371-67833161
MSN: hxjq@hxjq.cn
E-mial: sales@hxjq.com

Installation instructions of vibrating feeder

3/1/2012 6:31:14 PM

Vibrating feeder is the feeding equipment widely used in industry, machinery and mine.

Application scope of vibrating feeder: widely use for crushing and screening in the production line of mine, macadam court, metallurgy, building materials, chemical industry, beneficiation, coal mine and etc. In the vibrating feeder process flow , the blocky and granular materials from storage bin are fed to the receive equipments evenly, duly and continuously. It can feed materials to crushers continuously and evenly in sand production line, and can screen materials coarsely, it is widely applied in combined operation of crushing and screening in the industries of metallurgy, coal mine, beneficiation, building materials, chemical industry, grinding materials and etc.

Working principle of vibrating feeder: vibrating feeder uses the centrifugal force that produced by the rotation of eccentric block in the vibrator, which drives the screen box, vibrator and other movable parts move like a circle or approximate circle compulsively and continuously. Materials then move continuous like throw movement in the slant screen surface with the screen box, and discharge to the receive end continuously and evenly. 

Characteristic feature of vibrating feeder: vibrating feeder has the features of simple structure, smooth vibration, evenly feeding, good Continuous performance, adjustable exciting force; its flow can be changed and controlled at all time, the operation is simple; its eccentric block is excitation source, with the advantages of low noise, low energy consumption, good adjust performance, and non existence of material clashing; if it adopts enclosed body, it can prevent the dust pollution.

Installation requirement of vibrating feeder:

1. in order to guarantee the evenly and stable in the burdening and ration feeding of vibrating feeder and prevent the flow automatically, the vibrating feeder should be  installed in horizontal, if it process the common materials and feed materials continuously , it can install in the condition of slope down for 10°. For the sticky materials and high moisture content material , it can slop down 15°and then be installed.

2. The installed vibrating feeder should have 20mm movable gap, the gap should be horizontal, the suspension system should adopts flexible connect.

3. Before idle running, all the bolts should be fastened, especially the anchor bolt of vibrating motor; after continuous running for 3-5hours, the bolt should be fastened once again.

4. During test, two vibrating motor should rotate counter, its current and noise should be smooth; if something goes wrong, the machine must be stopped and checked immediately.

5. Motor bearing should add lubricating grease in every two months; in the high temperature season add it in every month.

GZG type vibrating feeder maintenances and requirement

1. In the operation of vibrating feeder, its amplitude should be checked regularly, the current and surface temperature of its vibrating motor should be in evenly amplitude and don’t shake. Its vibrating motor current should be smooth, if there is something wrong, please stop and check the machine immediately.

2. Lubrication of vibrating motor bearing is the key point of proper functioning of the whole vibrating feeder.  During operation, the molybdenum disulfide 2# lubricating grease should be add regularly to the bearing in every two months, however, in the hot temperature season , lubricating grease should be added in every month. The motor should be overhauled and its inner bearing should be replaced half-yearly.

With high quality and reasonable price, Henan Hongxing professional vibrating feeder manufacturer warmly Welcome More Customers.

Totop